青岛中海新材料有限公司 Qingdao Sinosea New Material Co., Ltd
Consultation Hotline 86-532-86877727
Lithium Remover

Lithium Remover




Lithium remover is made of a variety of non-sodium salts and inorganic compounds mixed and dried in a certain proportion. It is mainly used for removing lithium in aluminum solution with high lithium content.This product is used for removing the Lithium in aluminum melts.

Start to remove the Lithium after adjusting the composition of the alloys. Clean off the dross on the surface of the aluminum melts. Feed the Lithium remover into the powder blower when the temperature of the aluminum melts reaches 740℃ ~ 780℃. Use 99.99% nitrogen to carry the powder and blow it into the bottom of the aluminum melts. Move the tube horizontally to all parts of the smelter and pay special attention to the corners. Allow about 15 minutes for the reaction process to enable thorough contact of the Lithium remover with the aluminum melts. Stir the melts and keep them still for around 5 minutes. Clean off the dross on the surface of the aluminum melts. Implement a sampling analysis. Repeat the process if the content of Lithium is not consistent with the required standards.